See Auto

Replacing Ford Headlights
How horrible would it be one day to wake up and realize you don?t have any headlights? I think it would be pretty bad, it would not be safe to even drive your car if your headlights are broken or don?t work. Your lights are one of the parts that will last you a long while. But since they are on the exterior they are exposed to elements that can be damaging. They can loose their original luster. You can give your Ford vehicle a new fresh look by changing the grille, mirror, taillights, Ford hood and spoiler. It is really simple and easy to replace Ford parts, especially the lights. The reason for that is Fords popularity. A good place to look for the parts is Ford Parts Online; they are one of the most trusted auto parts dealers on the internet. So check them out if you need to replace any parts on your Ford vehicle. But let?s go back to your Ford lights. It?s quite easy to change them yourself, just follow my directions and you?ll be on the road again. First remove the exposed plastic or metal trim around the housing to get the headlight ring and screws. Using the right tools remove the four ring screws. Be careful, because it is pretty easy to strip them. Put some penetrating oil on each one for a few minutes. Also be sure not to turn the headlight-aiming screws. Once you remove the retaining ring the headlight will be free. Just unplug the wiring connector that is in the back of the headlamp. Then plug back the connector into the back of new headlight then place it in the mounting base. The headlight will position itself due to lugs in the back, but if it doesn?t then that means you have it upside down. Turn on the new headlight to see if it is working. If it doesn?t come on it probably means there is a problem with the wiring. You next step would be to replace the retaining ring. But again, be careful about the screws. The last thing would be to replace the trim elements that you had to remove. Mitch Johnson is a successful freelance author that writes regularly for <a href="http://www.atv-parts-n-accessories.com/" title="http://www.atv-parts-n-accessories.com/" target="_blank">http://www.atv-parts-n-accessories.com/</a> . His articles have also been featured on related sites such as <a href="http://www.myautopartstips.info/" title="http://www.myautopartstips.info/" target="_blank">http://www.myautopartstips.info/</a> and <a href="http://www.mybestautoparts.info/" title="http://www.mybestautoparts.info/" target="_blank">http://www.mybestautoparts.info/</a>
Source: www.ArticlePros.com

The scoop on carbon fiber hoods
Carbon Fiber seems to be the material of choice for aftermarket accessories. Now you can find carbon fiber mirrors, dash trim kits, hoods, fenders, and who knows what else. So what is the big deal with carbon fiber?Carbon Fiber seems to be the material of choice for aftermarket accessories. Now you can find carbon fiber mirrors, dash trim kits, hoods, fenders, and who knows what else. So what is the big deal with carbon fiber?There are a few reasons that carbon fiber has taken off in the past few years. It is a lightweight, rigid, visually appealing material. It has a unique textured look and a smooth finish. It is surprisingly strong, and doesn’t flex much.Take carbon fiber hoods for example. A lot of tuners like to add a carbon fiber hood on their cars. Opposed to the steel factory hoods, these carbon fiber hoods can reduce the weight of the vehicle by as much as 40 or 50 pounds on some applications. This modification, when added to other weight reducing modifications, can slightly decrease 0-60 times and marginally improves handling and acceleration.The other reason is the cool textured looking finish. Add a few carbon fiber touches as a theme throughout the vehicle and this can score some major style points.These carbon fiber hoods are fairly expensive for their weight reducing capabilities, but add a lot of style for the money. Browse through our website to find a carbon fiber hood for your car at www.majesticmodifications.com. Once you have purchased the hood you want, it’s time to get it installed. You may need a hand removing the factory hood due to its weight, but once it is removed, you should be able to handle the much lighter carbon fiber hood. The installation is fairly easy, so here is a quick guide to help you get it installed.Start your installation by removing the windshield washer jets for the factory hood. Disconnect the tubing that runs to them by unclipping or unscrewing them. If there is a light attached to the hood, go ahead and remove it, as you may want to reuse it on the new hood.With these removed, and with some help on the other side, prop the hood up with the hood prop if applicable. Remove the 4 bolts holding the hood to the hinges. If your hood has gas shocks, remove them before removing the hinge bolts. Be careful to support the weight of the hood when removing the hinge bolts to reduce the risk of damaging the fenders or the windshield. With the hinges and gas shocks unbolted, this will free up the heavy factory hood. Carefully remove it from the hinges by pulling it away from the windshield and set it aside.Set the new carbon fiber hood in place. It will be significantly lighter than the factory steel hood. Line up the bolts on the hinges and tighten them down. Reattach the gas shocks if applicable, or set the hood prop in place. Reattach your windshield washer jets if your hood permits, and run the lines on the underside. If you saved your light and want to reattach it, you can do so at this point. it can be attached using some 3M adhesive double sided tape, or you can carefully screw it in place, making sure to use screws small enough to not penetrate the top of the hood. Close the hood and check for alignment. If you need to adjust the alignment, lift the hood and loosen the hinge bolts slightly, just to where you can make small adjustments. Lower the hood and make any adjustments and re-tighten the bolts. This should complete your carbon fiber hood installation.If you need any support or advice for your carbon fiber hood installation, you can contact Majestic Modifications by emailing us at support@majesticmodifications.com. <a href="http://www.majesticmodifications.com">Majestic Modifications</a> is the complete car customization concept, specializing in air intakes and performace upgrades, body kits and <a href="http://www.carbon-fiber-hoods.blogspot.com">carbon fiber hoods</a>, glow gauges and interior accessories, wheels and tires, mobile video and elctronics.
Source: www.ArticlePros.com